Skip to content
Ramp Remote

Time Tracking for Offshore Teams: A Practical Setup Guide

How to track time across offshore teams: what to record, how to handle time zones, US overtime rules, software features, and using hours without micromanaging.

By Ramp RemoteUpdated

Time Tracking for Offshore Teams: A Practical Setup Guide

To track time for an offshore team, record each person’s start and stop times in their local time zone, assign them a schedule that carries that zone, route timesheets through a fixed weekly approval, and send approved hours into payroll. Then use the hours to plan capacity and workload, not to watch people. The rest of this guide shows how, step by step, including the US rules that apply when a team member is covered by US wage law.

Ramp Remote
Build Your Offshore Team With Confidence
Ramp Remote recruits vetted professionals in the Philippines and provides HR, payroll, and compliance support for offshore teams.
Explore Ramp Remote

TL;DR

  • Capture time in each person’s local zone and store it in UTC, so reports read correctly for a manager in Chicago and an analyst in Manila alike.
  • Track daily start and stop times (or a daily total), the weekly total, task or project, breaks and notes. Device activity alone is not a time record.
  • Set one weekly cycle: submit at the end of each person’s local week, approve on a fixed day, then run payroll.
  • Pick software for time zone-aware reporting, offline sync, payroll-ready exports and logs employees can see.
  • Use hours to measure capacity and estimated-versus-actual effort. Skip screenshots and keystroke logging.

What time tracking has to do for an offshore team

Time tracking for an offshore team serves three jobs at once: paying people correctly, planning work realistically and keeping a clear record. A distributed team makes each job harder. Nobody sees anyone’s desk, the workday of your staff may start when yours ends, and holidays differ by country.

That is why the setup matters more than the tool. A good setup answers five questions before anyone clocks in:

  1. Which hours is each person scheduled to work, and in which time zone?
  2. What gets recorded (hours, tasks, breaks, notes)?
  3. Who approves, and by when?
  4. How do approved hours reach payroll?
  5. What do managers do with the data afterward?

The sections below take these in order. If you are still deciding how an offshore team fits into your company, our guide to offshore team management covers the wider picture.

Set up schedules and time zones first

Most time tracking errors in distributed teams come from one mistake: using the company’s headquarters time zone for everything. A “9:00 to 17:00” schedule means nothing until you say whose 9:00 it is.

TimeTracker’s setup guide for remote teams recommends that each schedule carries its own time zone, so identical hours resolve to the correct local hours for each worker. The same guide suggests this checklist:

  • Set the workspace time zone, then create a schedule for each working time zone.
  • Assign every person a schedule.
  • Add the public holidays that apply to that person, not to your office.
  • Pick one consistent date and time format.
  • Configure submission deadlines, reminders and a second approver.

Store in UTC, show in local time

For the data itself, Keito’s guidance is to capture work in the employee’s local time zone, store it in UTC and convert it for whoever views the report. It also recommends flexible submission windows over a single headquarters deadline, and defining reporting periods in UTC while allowing submission within 24 hours of each person’s local workweek ending.

In practice, this means a Friday timesheet from a team member in the Philippines is not late just because it is still Friday afternoon in California. Each person closes their own week, then approval happens on a fixed day in the approver’s zone.

Make time zones visible in daily communication

Tracking is not only software. Slack’s time zone guidance suggests showing local working hours, scheduling messages and writing deadlines with an explicit date and time zone instead of vague words such as “today” or “tomorrow”. A shared team clock helps too. WherOra recommends putting everyone’s city and working hours in one place, naming a city rather than an abbreviation, and ending each day with a handover note covering what is done, what is blocked and what is needed from the next person.

That handover note doubles as a lightweight activity record. It costs a few minutes and tells you far more than a screenshot would.

Worker writing an end-of-day handover note

What to record

Record less than you could, but record the right things. Everhour’s guide to remote worker requirements lists the basics: each workday’s start and stop times or a daily total, the weekly total, the project or task, breaks and notes. It also says employers should provide a reasonable way to report unscheduled work that must be paid.

Here is a practical minimum for an offshore role:

Data point Why it matters
Start and stop time, or daily total Basis for pay and overtime
Weekly total Overtime and budget checks
Project or task Capacity planning and client costing
Breaks Consistent pay rules and fair workloads
Notes Context for exceptions and unscheduled work
Local time, UTC time, time zone Clean payroll and audit trail

For projects, categorize billable and non-billable time and document accomplishments, as TimeRewards advises. Write the approved method, submission deadline, approver and privacy protections into a short policy, so nobody guesses.

Put expectations in writing

The US Office of Personnel Management’s 2025 telework guide is written for federal agencies, but its checklist is a sound template for any remote arrangement. It says agreements should specify duties, expected work hours and schedule, reporting and oversight requirements, and communication expectations. The American Employers Alliance adds that a remote work policy should define core hours, response time expectations, overtime authorization and break rules.

For an offshore team, “core hours” are the key concept. Agree on a window, often a few hours of overlap, when people are reachable. Outside it, asynchronous work is fine.

US rules to check when the team works for a US business

A team member employed in the Philippines is governed by Philippine employment law, and the details differ from US law. Which US rules apply to a particular person depends on how they are employed and where they work, so confirm that with your employment adviser. If you hire through an arrangement where the provider is the employer, ask how it handles local hours, overtime and holidays. Our Ramp EOR service exists for exactly this employer-of-record question.

Still, US managers should know the baseline, because many time tracking guides assume it:

The takeaway: design your system to produce a clean daily and weekly record from day one. It satisfies whichever jurisdiction applies and makes payroll simple.

Choosing time tracking software for offshore teams

The features that matter for a distributed team differ from those of an office tool. TMetric’s roundup of workforce tools suggests prioritizing manual and automatic tracking, offline support, work schedules, holiday calendars, payroll-ready reports, project visibility, integrations and transparent data collection with privacy controls.

Insightful’s guide names four must-haves: cross-device and cross-OS support, time zone-aware reporting, offline tracking that syncs later, and logs employees can see. Its attendance guide adds that approval workflows, timestamped audit trails, exception detection and payroll or HRIS integrations separate stronger systems from basic ones, and that offline capture matters where connectivity is unreliable.

Use this as a scorecard:

Criterion What good looks like
Time zones Schedules per zone, reports in viewer’s zone
Entry methods Timer, manual entry and offline sync
Approvals Employee submits, manager approves, exceptions flagged
Holidays Calendar per country
Payroll Export or integration with your payroll system
Transparency Employees see exactly what is logged
Reporting Estimated versus actual, utilization, project totals

A small team of two or three people may be fine with a simple timesheet tool. Larger or multi-country teams benefit from approvals, audit trails and integrations.

Connecting hours to international payroll

Time data is only useful if it reaches payroll without retyping. TheDeskMonitor suggests recording local time, UTC time and the employee’s time zone at capture, then moving hours through employee submission and manager approval before payroll, with exceptions routed for review. Overtime, holiday and tax rules are then configured by each employee’s jurisdiction.

When you compare international payroll software, work through these questions:

  1. Countries. Does it cover every country where you employ people, including statutory deductions and payslips?
  2. Team size. Is pricing per employee per month, and does it scale with your hiring plan?
  3. Integrations. Does it import approved hours from your time tracker and export to your accounting system?
  4. Local rules. Who keeps overtime, holiday and leave rules current, the software or you?
  5. Support. Is there someone who understands local compliance when something goes wrong?

The fifth question is where many companies hit trouble. Software calculates; it does not take responsibility for local employment compliance. A managed model removes that burden, because the provider runs payroll and compliance for its own employees on your behalf. Our offshore hiring cost checklist lists what a complete quote should cover, so you can compare a software-plus-employer setup against a managed one on equal terms.

Using tracked hours without micromanaging

Hours are best read as a planning tool. TMetric’s guidance is to use tracked time to understand capacity, workload, project progress and estimated versus actual hours, and to keep activity data transparent and limited.

Toggl advises focusing on macro-level data such as billable versus non-billable hours and estimated versus actual time rather than screenshots or device activity, with goals tied to business performance rather than to individuals. WorkTime points out that a 2024 study found 80% of workers already feel monitored to a moderate or high degree, a reason to be careful about what you collect.

A workable review rhythm looks like this:

  • Weekly: compare estimated and actual hours on current tasks. A large gap means the estimate was off or the task was unclear, not that the person is slow.
  • Monthly: look at utilization by project and role. Is the team overloaded, or is there room for more work?
  • Quarterly: pair hours with outcomes such as tickets closed, invoices processed or campaigns shipped.

The outcome measures matter more than the clock. A bookkeeper who closes the month on time with accurate reconciliations is performing, whatever the timer shows. The same logic applies to every role, from support specialists to developers. Our guide to offshore team management goes deeper on setting expectations by role.

Our perspective

Most offshore time tracking problems are not software problems. They start when nobody decided who is the employer, who approves hours, and what the schedule is in the person’s own time zone.

That is why we run offshore staffing as one managed arrangement. Our clients meet and select vetted candidates in the Philippines, and the monthly fee per hire covers employment, payroll, compliance, equipment and ongoing support, so the cost is visible up front. Our centralized platform and HR and payroll services are built to let you manage an offshore team without assembling five separate tools.

Our advice is simple: agree the schedule and core hours before day one, keep records light and visible to the employee, and judge your people on the work they deliver. Clear expectations and a personal point of contact do more for performance than any monitoring software.

Josh

How Ramp Remote fits

If you want offshore staff without building the payroll and compliance layer yourself, Ramp Remote recruits, vets, employs and manages skilled professionals in the Philippines for US, Australian and New Zealand businesses. You pay a monthly fee per full-time hire, covering salary, compliance, equipment, support and onboarding.

Published rates start at $1,400 per month per person for a Virtual Assistant, $1,600 for a Bookkeeper or Payroll Officer, and $2,000 for a Full-Stack Developer. See every role and rate on our roles page.

Ramp Remote

Want to see what a quote includes before you commit? Read what your offshore staffing quote covers, or walk through how your first offshore hire works.

A simple rollout plan

You can put all of this in place in a week or two:

  1. Write the policy. One page: schedule, core hours, approved tracking method, submission deadline, approver, privacy rules.
  2. Configure schedules. One per time zone, with local holidays.
  3. Choose the tool. Score two or three options on the table above.
  4. Pilot with one team. Check that the weekly submission and approval rhythm works across the zone gap.
  5. Connect payroll. Confirm approved hours export cleanly and overtime or holiday rules match the person’s jurisdiction.
  6. Review monthly. Look at estimated versus actual hours and adjust workloads. Keep the daily handover note.

Data security belongs in the same rollout. Time logs reveal client and project names, so read our offshore staff data security checklist before choosing where the data lives.

FAQ

What should I track for remote employees?

Track start and stop times or a daily total, the weekly total, the project or task, breaks and notes, and give people a way to report unscheduled work. Keep activity data limited and visible to the employee. Hours and outcomes tell you more than keystrokes.

How do I track time across time zones?

Give each person a schedule that carries their own time zone, capture time locally and store it in UTC. Let people submit within 24 hours of their local week ending, then approve on a fixed day in the approver’s time zone.

Do I need screenshots or keystroke logging?

No. Guides from Toggl and WorkTime both steer employers toward macro-level data such as estimated versus actual hours, and away from screenshots and keystroke logging. These approaches protect privacy and trust while still giving you what payroll and planning need.

How does time tracking connect to payroll?

Record local time, UTC time and time zone at capture, have the employee submit and the manager approve, then send approved hours to payroll with exceptions flagged for review. Overtime, holiday and tax rules are applied by the employee’s jurisdiction.

Sources

Good people, more possible.